I believe that you can't go back to older versions of software with this version, so do I need to wait for kernels and roms to be updated before I can root?
Thanks
Thanks
Showing posts with label Install. Show all posts
Showing posts with label Install. Show all posts
Sunday, 25 October 2015
How To Install CWM or TWRP Recovery In Nokia XL?
Plz anyone tell me, What's Recovery Mode?, How Much?
and,
How To Install CWM or TWRP Recovery In Nokia XL?
and,
How To Install CWM or TWRP Recovery In Nokia XL?
Saturday, 24 October 2015
GUIDE: Install Sony Walkman on LG-G4 (rooted, unlocked, H-815, not tested on others!)
Hello guys,
after some sleepless nights and a strong wish to throw my phone against a wall, i finally found a way to get the sony walkman Port from IBANEZ7 (thanks to him for his awesome job) working.
Everyone who already tried it will know the problem:
No matter what you do, the player either force closes or the sound enhancements just won`t work. Well, there is a way around it, even if you won`t have the newest version. The only thing that doesn`t work is the visualization.
Before starting, please read the following very carefully:
By following this guide, you will do everything on your own risk.
This is tested ONLY on the H815 international/european unbranded model with unlocked bootloader and root.
The firmware i used is this custom rom: http://forum.xda-developers.com/g4/d...d-4-1-t3213742 based on android 5.1. I would also like to generally recommend this ROM, since it`s awesome.
I`m pretty sure that this also will work with the G4 stock 5.1 firmware (maybe also 5.0) since all those walkmans gave me the exact same errors with stock 5.0, stock 5.1 and the 7 HD version, but again, it`s tested only with the 7HD 6.1 rom, so keep that in mind. As a general warning, I`m not responsible for any errors, bricks, etc and i won`t be able to help you if something goes wrong.
Now, let`s get on:
Step 1:
Make sure your phone model and software matches the description above and has the following things installed and working:
- TWRP recovery or a similiar recovery program.
- system app remover - in case you have to remove old walkman files and/or the stock LG-G4 player and equalizer.
Step 2:
Download these 3 zips and put them on your phone (SD card or internal root folder)
Walkman 2.0 by ibanez7: http://www.mediafire.com/download/cl...By_ibanez7.zip
Walkman 3.1 by Ibanez7
http://www.mediafire.com/download/7q...By_ibanez7.zip
Walkman 3.5 by Ibanez7
http://www.mediafire.com/download/bw...By_ibanez7.zip
All links are taken from his official thread here: http://forum.xda-developers.com/show....php?t=2730431 so don`t worry.
Step 3:
Disable or deinstall ANY sound enhancement/equalizer like Viper, music FX etc. and even the stock LG-G4 equalizer. I deinstalled everything, including the stock music player and equalizer, but you can try to just disable them.
Step 4 (SKIP this if you`ve never tried to install walkman before)
Go into system app remover, give it root permission if you haven`t already, then go into system apps and deinstall the following:
- extension for wikipedia, extension for youtube, extension for youtube karaoke, extension for google song text search (all 4 have the same symbol, which is a musical note)
- clear audio settings (may have another name depending on the walkman version you tried to install, but it`s the white equalizer symbol with three switches)
- headphone chooser (headphone symbol)
- visualization
- walkman (could be named music, depending on the version you tried to install).
Since the stock LG player is also called music, search for this symbol if you don`t find a "walkman": http://www-static.se-mc.com/blogs.di...fb3d011c3d.jpg
Step 5 (Installation)
To make sure that everything you did in step 3 and 4 was correctly applied, reboot your phone and reassure yourself that everything is really disabled/deinstalled.
After doing that, reboot your phone again, but this time into TWRP recovery.
Now do the following:
- Wipe cache and dalvik cache
- Install the Zips you downloaded in step 2 in the following order (THE CORRECT ORDER IS VERY IMPORTANT, YOU CAN GET BOOTLOOP IF YOU CHANGE IT!)
Do not restart your phone or wipe cache/dalvik between the zips, just install one after another.
1: Walkman 2.0
2: Walkman 3.1
3: Walkman 3.5
4: Walkman 2.0 (yes, again!)
After doing that, just reboot your phone into system without wiping cache and dalvik. Your walkman and all it`s sound enhancements should work flawlessly now. Please note that it can take up to a minute until the sound enhancements start to working after every reboot of the phone, so be patient and just wait a little bit.
OPTIONAL (not directly related with walkman)
As an optional step, i`d strongly recommend to also follow this guide, as it will not only make the earphone output much louder, but also enhances the sound quality for some weird reason:
http://forum.xda-developers.com/g4/t...sting-t3182304
Instead of editing "mixer_paths.xml" on your phone (you will understand what i`m talking about when you read the guide) you can just copy it to the root of your phone via Root explorer and then copy it to the PC from the phone. From there, you can easily make a backup by copy and paste and also easily edit the file with "Notepad++" (do not use word, regular notepad or similiar standard windows text programs!!!). It`s much easier on the PC, since you can just bring up the search bar via STRG + F once the file is opened in Notepad++ and then simply paste <path name="headphones-advanced"> in there, so you will find the parameter instantly, instead of searching the whole text on your phone....Once you edited the "mixer_paths.xml" - i would recommend a value between 86 - 89 (94 is way too loud and gets distorted) just put it back on the root of your phone (keep a backup of the original on the PC or in a separate folder in your phone, so you don`t replace it), then go into root explorer, find the file, copy and paste it back into "root/system/etc". Now long press on the file, a menu will show up. Click on permissions and set it on RW-R-R (all three boxes checked under "read", and the upper first checked under "write", rest should be unchecked. Now you`re good to go and your phone will be loud as F--K :D
I know you probably don`t have a clue what i`m talking about, but you will understand when you read his instructions.
Have fun and be careful in what you`re doing!
after some sleepless nights and a strong wish to throw my phone against a wall, i finally found a way to get the sony walkman Port from IBANEZ7 (thanks to him for his awesome job) working.
Everyone who already tried it will know the problem:
No matter what you do, the player either force closes or the sound enhancements just won`t work. Well, there is a way around it, even if you won`t have the newest version. The only thing that doesn`t work is the visualization.
Before starting, please read the following very carefully:
By following this guide, you will do everything on your own risk.
This is tested ONLY on the H815 international/european unbranded model with unlocked bootloader and root.
The firmware i used is this custom rom: http://forum.xda-developers.com/g4/d...d-4-1-t3213742 based on android 5.1. I would also like to generally recommend this ROM, since it`s awesome.
I`m pretty sure that this also will work with the G4 stock 5.1 firmware (maybe also 5.0) since all those walkmans gave me the exact same errors with stock 5.0, stock 5.1 and the 7 HD version, but again, it`s tested only with the 7HD 6.1 rom, so keep that in mind. As a general warning, I`m not responsible for any errors, bricks, etc and i won`t be able to help you if something goes wrong.
Now, let`s get on:
Step 1:
Make sure your phone model and software matches the description above and has the following things installed and working:
- TWRP recovery or a similiar recovery program.
- system app remover - in case you have to remove old walkman files and/or the stock LG-G4 player and equalizer.
Step 2:
Download these 3 zips and put them on your phone (SD card or internal root folder)
Walkman 2.0 by ibanez7: http://www.mediafire.com/download/cl...By_ibanez7.zip
Walkman 3.1 by Ibanez7
http://www.mediafire.com/download/7q...By_ibanez7.zip
Walkman 3.5 by Ibanez7
http://www.mediafire.com/download/bw...By_ibanez7.zip
All links are taken from his official thread here: http://forum.xda-developers.com/show....php?t=2730431 so don`t worry.
Step 3:
Disable or deinstall ANY sound enhancement/equalizer like Viper, music FX etc. and even the stock LG-G4 equalizer. I deinstalled everything, including the stock music player and equalizer, but you can try to just disable them.
Step 4 (SKIP this if you`ve never tried to install walkman before)
Go into system app remover, give it root permission if you haven`t already, then go into system apps and deinstall the following:
- extension for wikipedia, extension for youtube, extension for youtube karaoke, extension for google song text search (all 4 have the same symbol, which is a musical note)
- clear audio settings (may have another name depending on the walkman version you tried to install, but it`s the white equalizer symbol with three switches)
- headphone chooser (headphone symbol)
- visualization
- walkman (could be named music, depending on the version you tried to install).
Since the stock LG player is also called music, search for this symbol if you don`t find a "walkman": http://www-static.se-mc.com/blogs.di...fb3d011c3d.jpg
Step 5 (Installation)
To make sure that everything you did in step 3 and 4 was correctly applied, reboot your phone and reassure yourself that everything is really disabled/deinstalled.
After doing that, reboot your phone again, but this time into TWRP recovery.
Now do the following:
- Wipe cache and dalvik cache
- Install the Zips you downloaded in step 2 in the following order (THE CORRECT ORDER IS VERY IMPORTANT, YOU CAN GET BOOTLOOP IF YOU CHANGE IT!)
Do not restart your phone or wipe cache/dalvik between the zips, just install one after another.
1: Walkman 2.0
2: Walkman 3.1
3: Walkman 3.5
4: Walkman 2.0 (yes, again!)
After doing that, just reboot your phone into system without wiping cache and dalvik. Your walkman and all it`s sound enhancements should work flawlessly now. Please note that it can take up to a minute until the sound enhancements start to working after every reboot of the phone, so be patient and just wait a little bit.
OPTIONAL (not directly related with walkman)
As an optional step, i`d strongly recommend to also follow this guide, as it will not only make the earphone output much louder, but also enhances the sound quality for some weird reason:
http://forum.xda-developers.com/g4/t...sting-t3182304
Instead of editing "mixer_paths.xml" on your phone (you will understand what i`m talking about when you read the guide) you can just copy it to the root of your phone via Root explorer and then copy it to the PC from the phone. From there, you can easily make a backup by copy and paste and also easily edit the file with "Notepad++" (do not use word, regular notepad or similiar standard windows text programs!!!). It`s much easier on the PC, since you can just bring up the search bar via STRG + F once the file is opened in Notepad++ and then simply paste <path name="headphones-advanced"> in there, so you will find the parameter instantly, instead of searching the whole text on your phone....Once you edited the "mixer_paths.xml" - i would recommend a value between 86 - 89 (94 is way too loud and gets distorted) just put it back on the root of your phone (keep a backup of the original on the PC or in a separate folder in your phone, so you don`t replace it), then go into root explorer, find the file, copy and paste it back into "root/system/etc". Now long press on the file, a menu will show up. Click on permissions and set it on RW-R-R (all three boxes checked under "read", and the upper first checked under "write", rest should be unchecked. Now you`re good to go and your phone will be loud as F--K :D
I know you probably don`t have a clue what i`m talking about, but you will understand when you read his instructions.
Have fun and be careful in what you`re doing!
Imperium Rom 10.1 Problem after complete install
Downloaded newer version of the Imperium rom and installed it successfully after i setup the google username and password install some softwares then rebooted the phone i am now stuck into the samsung galaxy s4 logo and no more movements at all for several minutes. tried several times still the same tried full wipe again installed version 9.1 now same story allowed me to boot first time then after that i reboot and the stuck to samsung glaxy s4 logo stuck again any idea what is happening?
How to install a recovery?
Hi
I have a non rooted Note 4 N901F, L.5.1.1.
I didn't plan to root it for now, that is, unless I have to.
What I mean is I would like to have a recovery, like TWRP, so I can do full backups, wipe caches, and so.
How do I install a recovery? Do I need to root first?
I have a non rooted Note 4 N901F, L.5.1.1.
I didn't plan to root it for now, that is, unless I have to.
What I mean is I would like to have a recovery, like TWRP, so I can do full backups, wipe caches, and so.
How do I install a recovery? Do I need to root first?
Friday, 23 October 2015
just got note 5,should I install update?
I'm on 5.1.1 kernal 3.10.61 . I have Verizon and wanted to know if I should hold out on the update our if I souls just install it. I've been out of the rooting game for a while but who doesn't love root?
Ready to trip knox and install a better ROM, how do I install TWRP?
I want to use this awesome ROM: http://forum.xda-developers.com/gala...n-1-0-t3094423
I need to install TWRP. When I first got the phone, I learned that this was not possible with AT&T. This still the case? I have been searching and I haven't found any tutorials or youtube videos specifically for AT&T Galaxy s6 -- is it the same process? I'm currently running Android 5.0.1 and I flashed a ROM with Flashfire (Ultra Light 1.8 by Rayman360) -- it's a great ROM but you can't do much since it's basically a de-bloat stock.
Can someone point me in the right direction for installing TWRP on the AT&T Galaxy s6?
I suspect I will need to do a full wipe here and then re-root with a different method.
I am familiar with Odin and TWRP, I have been using custom ROMs for years now.
I need to install TWRP. When I first got the phone, I learned that this was not possible with AT&T. This still the case? I have been searching and I haven't found any tutorials or youtube videos specifically for AT&T Galaxy s6 -- is it the same process? I'm currently running Android 5.0.1 and I flashed a ROM with Flashfire (Ultra Light 1.8 by Rayman360) -- it's a great ROM but you can't do much since it's basically a de-bloat stock.
Can someone point me in the right direction for installing TWRP on the AT&T Galaxy s6?
I suspect I will need to do a full wipe here and then re-root with a different method.
I am familiar with Odin and TWRP, I have been using custom ROMs for years now.
Thursday, 22 October 2015
Help how to install philz recovey in e311
Can any help me how to install philz revovery on my device micromax e311 which is mt6592m chipset....
Sent from my SM-G920I using XDA Free mobile app
Sent from my SM-G920I using XDA Free mobile app
CM 12 won't install on H/K m8
I just had my m8 replaced from asurion and my old device was running cm 12 nightly builds just fine. My new device won't install any of the builds. The TWRP log says this package is meant for htc_m8, htc_m8whl, htc_mwl, m8, m8wl etc. but this device is m8_whl. It's the same exact model number it doesn't make any sense. Do i need to change the device name somehow or what? pls and thanks if you help.
Is it possible to install Stock Rom despite a broken USB port?
Hi everyone,
I have the following problem:
The USB port of my Galaxy S4 Mini (GT-I9195), on which I have installed CyanogenMod 11 and CWM Recovery, is broken. The mobile phone can't be charged or connected to the PC. A defective battery or cable can be ruled out. Now I would like to reset the device back to its original state in order to get it repaired, because the warranty is still valid.
I've already unrooted the phone and the Flash Counter is set to 0, so only the Stock Rom needs to be installed, I think? However, I do not know how to do this, I can not use Odin because of the broken USB port and Mobile Odin is not yet compatible with the model as far as I know.
Is there a solution to this problem? Perhaps a compatible alternative to Mobile Odin or a Stock Rom that you can install via CWM?
Regards, Fello
I have the following problem:
The USB port of my Galaxy S4 Mini (GT-I9195), on which I have installed CyanogenMod 11 and CWM Recovery, is broken. The mobile phone can't be charged or connected to the PC. A defective battery or cable can be ruled out. Now I would like to reset the device back to its original state in order to get it repaired, because the warranty is still valid.
I've already unrooted the phone and the Flash Counter is set to 0, so only the Stock Rom needs to be installed, I think? However, I do not know how to do this, I can not use Odin because of the broken USB port and Mobile Odin is not yet compatible with the model as far as I know.
Is there a solution to this problem? Perhaps a compatible alternative to Mobile Odin or a Stock Rom that you can install via CWM?
Regards, Fello
1Weather Install Problem
Just an FYI to any other 1Weather app 5X/6P users, since I'm a fan of the app. Here is a problem I found and a fix.
The app was fine on my Galaxy S4 (L) and my Nexus 9 (M) and both recognized the fact that I had installed and purchased it a few months ago. A new install just now on the 5X, of their latest 3.3.4 version, basically does not work well at all. I did an uninstall of it on the Nexus 9 and a reinstall there also didn't work right.
So, since it installed fine a while back, I found an old 3.2.1 version apk online and installed that. It works fine now, and I would think it still will whenever the OS gets around to updating it to that new 3.3.4 version. I suspect that since the 3.3.4 ver was running fine when it was applied on top of a prior running copy.
Here is the link to the old version.
The app was fine on my Galaxy S4 (L) and my Nexus 9 (M) and both recognized the fact that I had installed and purchased it a few months ago. A new install just now on the 5X, of their latest 3.3.4 version, basically does not work well at all. I did an uninstall of it on the Nexus 9 and a reinstall there also didn't work right.
So, since it installed fine a while back, I found an old 3.2.1 version apk online and installed that. It works fine now, and I would think it still will whenever the OS gets around to updating it to that new 3.3.4 version. I suspect that since the 3.3.4 ver was running fine when it was applied on top of a prior running copy.
Here is the link to the old version.
Unable to install TWRP on N910F
So I have tried to install TWRP 2.8.7.0 with both ODIN 3.07 and 3.10 but even though it showed "PASS" and now issues, stock recovery comes up and not TWRP... I'm on N910FXXU1COH4 5.1.1 if that matters.. Please, any help is appreciated..
Any way to take code from new Chromecast Audio and install on Nexus Q
Is there any way to take the code from the new Chromecast audio and implement it into the Nexus Q?
install xposed, what version?
hello, should i install this or this one version?
A) xposed-v75-sdk22-arm64.zip -
B) xposed-v75-sdk21-arm64.zip
and of course i MUST use this XposedInstaller_3.0-alpha*.apk ?? no others apk older versions like 2.7 ?
A) xposed-v75-sdk22-arm64.zip -
B) xposed-v75-sdk21-arm64.zip
and of course i MUST use this XposedInstaller_3.0-alpha*.apk ?? no others apk older versions like 2.7 ?
[Tutorial] - How to install any firmware using Windows Device Recovery Tool
It worked for me, it might work for you. Do it at your own risk.
Windows Device Recovery Tool (WDRT) will download and install only the latest version of the software available for your device.
This tutorial will show you how to use WDRT to install ANY firmware version you want on your windows phone device.
That is, you can upgrade or downgrade. For example, go from wp 10 to wp 8.0, or from wp 8.1 to wp 8.0, or whatever you want.
Here is how to use Windows Device Recovery Tool to install any firmware released for your model:
I try to ilustrate the process in this video: https://www.youtube.com/watch?v=gnLQ_u4kF7E
STEPS:
0) Download the firmware you want to install (only the .ffu file)
1) Let WDRT downloads the last firmware version for your model (that's what it does). When the download is completed, close the program before the installation starts. You don't have to have the last firmware version installed on your phone, but you have to have it on the WDRT folder.
2) Go to the location where WDRT stores the files: c:/programdata/microsoft/packages/products/
3) Duplicate the folder "RM-xxx" (your model) containing the files WDRT downloaded. You'll have two folders with the same content, like "RM-xxx" and "ARM-xxx", for example.
4) Go back to the place where the .ffu file you want to install is and copy it.
5) Enter the "ARM-xxx" folder and paste the .ffu file.
5) Now you have two .ffu files in "ARM-xxx" folder. Copy the name of the original .ffu file that was already there before you paste the other .ffu file and delete it (the original one).
6) Rename the .ffu file you've just pasted with the name you just copied.
5) Open WDRT, select your phone, and click install/reinstall. After the program checks the compatibility of the files, the message "switching the phone to flashing mode" will apear, as soon as it happens, go back to the "Products" folder and rename the folder "RM-xxx" to something else, like "RM-xxxA, and rename the folder "ARM-xxx" to "RM-xxx". This has to be done quickly, before the installation starts.
6) If everything is OK, the installation will start and you'll have your firmware installed.
With this method i finally got my lumia 620 working again, after the touch screen stopped working due to an accidentally upgrade. I couldn't use any other method because both my lumia volume buttons are broken, so the flashing process needed to be automatic.
Windows Device Recovery Tool (WDRT) will download and install only the latest version of the software available for your device.
This tutorial will show you how to use WDRT to install ANY firmware version you want on your windows phone device.
That is, you can upgrade or downgrade. For example, go from wp 10 to wp 8.0, or from wp 8.1 to wp 8.0, or whatever you want.
Here is how to use Windows Device Recovery Tool to install any firmware released for your model:
I try to ilustrate the process in this video: https://www.youtube.com/watch?v=gnLQ_u4kF7E
STEPS:
0) Download the firmware you want to install (only the .ffu file)
1) Let WDRT downloads the last firmware version for your model (that's what it does). When the download is completed, close the program before the installation starts. You don't have to have the last firmware version installed on your phone, but you have to have it on the WDRT folder.
2) Go to the location where WDRT stores the files: c:/programdata/microsoft/packages/products/
3) Duplicate the folder "RM-xxx" (your model) containing the files WDRT downloaded. You'll have two folders with the same content, like "RM-xxx" and "ARM-xxx", for example.
4) Go back to the place where the .ffu file you want to install is and copy it.
5) Enter the "ARM-xxx" folder and paste the .ffu file.
5) Now you have two .ffu files in "ARM-xxx" folder. Copy the name of the original .ffu file that was already there before you paste the other .ffu file and delete it (the original one).
6) Rename the .ffu file you've just pasted with the name you just copied.
5) Open WDRT, select your phone, and click install/reinstall. After the program checks the compatibility of the files, the message "switching the phone to flashing mode" will apear, as soon as it happens, go back to the "Products" folder and rename the folder "RM-xxx" to something else, like "RM-xxxA, and rename the folder "ARM-xxx" to "RM-xxx". This has to be done quickly, before the installation starts.
6) If everything is OK, the installation will start and you'll have your firmware installed.
With this method i finally got my lumia 620 working again, after the touch screen stopped working due to an accidentally upgrade. I couldn't use any other method because both my lumia volume buttons are broken, so the flashing process needed to be automatic.
[Need Help][Installation] How to Install Stock Rom from HTCDev
Greetings,
I need help installing Stock ROM to my HTC desire.
Downloaded Desire616_1.00.708.028.tar.zip from http://www.htcdev.com/devcenter/downloads
Hope this is the stock ROM for INDIA.
What is the direct link to the stock ROM if i am wrong.
Now the question is how can i flash it via SP Flash Tool or anything else.
I am getting confused how to get the scatter file and select which options.
Please Help!
Thanks!
I need help installing Stock ROM to my HTC desire.
Downloaded Desire616_1.00.708.028.tar.zip from http://www.htcdev.com/devcenter/downloads
Hope this is the stock ROM for INDIA.
What is the direct link to the stock ROM if i am wrong.
Now the question is how can i flash it via SP Flash Tool or anything else.
I am getting confused how to get the scatter file and select which options.
Please Help!
Thanks!
[Please HELP] Problem with touchscreen - After Twrp install
Hi all,
I downloaded the latest TWRP from https://dl.twrp.me/i9305/ - twrp-2.8.7.0-i9305.img.tar 8.1M
I installed it with ODIN. The flash was a success and when the phone rebooted the touchscreen was unresponsive.
I have tried another version of twrp for this phone and I can get into twrp, but the touchscreen doens't work. I tried replugging in the ribbon lead for the digitiser and that made no difference.
Do you think its a software problem or that I have fried something?
Many Thanks
Andrew
I downloaded the latest TWRP from https://dl.twrp.me/i9305/ - twrp-2.8.7.0-i9305.img.tar 8.1M
I installed it with ODIN. The flash was a success and when the phone rebooted the touchscreen was unresponsive.
I have tried another version of twrp for this phone and I can get into twrp, but the touchscreen doens't work. I tried replugging in the ribbon lead for the digitiser and that made no difference.
Do you think its a software problem or that I have fried something?
Many Thanks
Andrew
Rom install for amateur(zte blade g)
hi everybody first thread for me in this forum. First off all i would appreciate some help changing my rom in zte blade g (this one s*cks moded by zte) and giving me some roms to choose ! thanks :D
How to install stock rom ? mi 4i
Hi,
Im getting bootloop after the update !
ive downloaded the stock rom from http://en.miui.com/download-263.html here . Now I need to install it, I've tried it using MiFlash tool. But it doesn't work.. Someone please help.
Available files
Im getting bootloop after the update !
ive downloaded the stock rom from http://en.miui.com/download-263.html here . Now I need to install it, I've tried it using MiFlash tool. But it doesn't work.. Someone please help.
Available files
How to install Stagefright fix on rooted XT1068
Hi,
so I'm having a little bit of a problem with my Moto G 2nd Gen. Dual SIM 2014 (XT1068). I got the notification for the Stagefright fix update a few days ago, but every time I try to install it the installer throws an error after the progress bar is at about 40%.
Now I've found the cause. In /cache/recovery/last_log it says that /system/bin/app_process32 has an unexpected SHA1 sum. The log:
The phone has an unlocked bootloader and was rooted with SuperSU but otherwise unmodified (I needed the root for the Sixaxis Controller). Some forum posts I found mentioned that the "Xposed Framework" is probably the cause, but I did not install that.
... I've found the original file in /system/bin/app_process32_original but system-recovery.sh also has a backup and was definitely modified by SuperSU
So I guess the question is: how can I install the Stagefright update without losing root?
System Version: 22.26.1.titan_retde.retdeall.en.DE retde
Update Version: 22.56.3.en.DE
so I'm having a little bit of a problem with my Moto G 2nd Gen. Dual SIM 2014 (XT1068). I got the notification for the Stagefright fix update a few days ago, but every time I try to install it the installer throws an error after the progress bar is at about 40%.
Now I've found the cause. In /cache/recovery/last_log it says that /system/bin/app_process32 has an unexpected SHA1 sum. The log:
Code:
Finding update package...
I:Update location: /cache/Blur_Version.22.26.1.titan_retde.retdeall.en.DE.zip
Opening update package...
I:read key e=3 hash=20
I:1 key(s) loaded from /res/keys
Verifying update package...
I:comment is 1462 bytes; signature 1439 bytes from end
I:whole-file signature verified against RSA key 0
I:verify_file returned 0
Installing update...
installing gptupgrade updater extensions
file_contexts path is present in /tmp/file_contexts
mount point :/system location: /dev/block/platform/msm_sdcc.1/by-name/system , file system type :ext4Verifying current system...
file "/system/bin/app_process32" doesn't have any of expected sha1 sums; checking cache
file size of "/system/bin/app_process32" is 75364
sha1 of "/system/bin/app_process32" is f29d36738da21a7cef064326462d9d9e527ba121
expected sha1 is: fb3a1cfd2e27dd648cb7ae44b9283147ce44c5f1
c0dd7831406b1e243282a46983d4440578600417
402935808 bytes free on /cache (75364 needed)
dumping bad file /system/bin/app_process32 to /cache/recovery/last_badfile
failed to stat "/cache/saved.file": No such file or directory
failed to load cache file
script aborted: "/system/bin/app_process32" has unexpected contents.
"/system/bin/app_process32" has unexpected contents.
E:Error in /cache/Blur_Version.22.26.1.titan_retde.retdeall.en.DE.zip
(Status 7)
Installation aborted.
Installation aborted.
I:Saving locale "en_GB"
Rebooting...... I've found the original file in /system/bin/app_process32_original but system-recovery.sh also has a backup and was definitely modified by SuperSU
So I guess the question is: how can I install the Stagefright update without losing root?
System Version: 22.26.1.titan_retde.retdeall.en.DE retde
Update Version: 22.56.3.en.DE
Subscribe to:
Posts (Atom)