MX4 pro lost phone voice after flash OMNI ROM 5.1.1.

Hi folks,

Thanks every developer in xda forum to let all of technology enthusiasts find his loves ROMs.

I have flashed OMNI 5.1.1 (omni-5.1.1-20151008-mx4pro-FINAL) on my new MX4 pro via TWRP 2.8.7.0.

All is good, such open Gapps, supersu 2.46, busybox & terminal, except phone have no voice & sound.

Even I have rebooted and clear cache more time, every one call me use difference mobile ISPs can not hear my sound and I can't hear his sound.

Did I lost some step of flash ROMs processes? Any one have encountered this bug and knows how to solve?

Any comments are highly appreciated.

one e8 running problem after RUU !

hey guys ,
first of all excuse me for my bad english .
i have an euro one e8 single (401).

i didnt get the update message and recently try to update manually from Ruu
so , i found a 2.34.401.5 ruu.zip from xda and try to install it using sd card .
then i get the error the device halted due large image update failed .
and try to install it with adb , but nothing changed , then i just download the 2.33.401.5 Ruu.exe and try to install it and i faced the version error that said the current version is newer then the 2.33.401.5 , and now , i can only access to bootloader, also i couldnt find any newer version of ruu ,
so please help me what to do , is it possible to downgrade ? or does someone has the ruu files or a stock ruu ?

and the bootloader is locked and the phone is S-on also :(

Software update registration failed after odin flash.

Hey guys i was using cm 12.1 on my i9500 then i flashed back to stock rom .. i removed all mods ,root and everything and did a clean install via odin.. everything is working fine but i'm unable to register to software update ... I'm sure i installed the correct firmware because it worked for me last time ... i want this to work because i broke its sim card slot and i need to get back my warranty before i go to the care.. Thanks !

Here's what i tried so far
- factory reset
-reboot
-i also tried downloading other stock firmware and i have the same error.

And in download mode it says ODIN mode .. does this have anything to do with it ? ill post some screenshots now.

Attached Thumbnails

 


 


 

No screen after update #help!

Hi Guys,

I'm having trouble with my moto x 2014. I flashed the RETEU ALL factory image from this thread (http://forum.xda-developers.com/moto...2-5-0-t2970818) . The phone got in 4.4 again. From there I downloaded the 5.0 OTA via the settings interface, and the phone started installing. After that, the phone stayed blank. I cannot get the phone to boot, neither in recovery, nor bootloader. When I press the downkey for > 3 seconds, the green led does appear on the top of the device, but nothing happens on the screen.

I've never had this and no physical damage was done to the device in between the upgrades. Any ideas on the cause and how to fix this? Your help is appreciated!

Phone keeps rebooting after shutdown

I've bought my Redmi Note 2 one month ago: everything worked fine for the first 3 weekes, but in the last few days one bug came out. Every time I power off the phone it keeps rebooting showing the boot logo (mi.com) for few seconds: I have to pull of the battery to normally power off the phone.

When the phone is one there are no problems: everuthing works fine, no reboot.

I've installed all the lates xiaomi.eu weekly rom (now I'm on 5.10.22) but the problem persists... I've also tried the official stable rom (miui 6 6.7.11) but nothing changed...

What can I do? Is it a software problem or maybe hardware?

Video Recording Failure After Few Minutes After Boot

I searched the forum and couldn't find anyone with anything similar to this...

Using COS12.1 - yog4pas1n0
TWRP Installed
Rooted
Xposed Installed
ColorOS Camera

Those are the biggest recent changes I've made to my OPO . But recently, the camera will fail for video recording only for all apps (Snapchat, Camera, Instagram, Whatsapp etc.)
I've rebooted a numerous times and always the same result, it'll work after boot (repeatedly) but then fail to work a few minutes after.

I've uninstalled all the Xposed Modules thinking one of them could be the issue
Ran a boot manager to run only the essentials, but still the same issue

I can still take photos but it's just the video recording

Any suggestions from anyone?

How to change email view to next email after deleting?

When I delete an email, I go back to the email list. I would rather have it open the next email.

I could not find the setting for this. Anyone know where it is?

THANKS

Note 4 die after a night ( work great at night but die in the morning)

Hey guys, my phone was die this morning. Battery about 80% at night before it happen. I did try to plug in charger, soft reboot, or even plug in computer, just nothing happen, no led indicator light, no vibration, nothing. Anybody experience with this before? Any other help would be much appreciate! Thanks! ( My phone was root and run on rapture rom about one month without issue)

Note 5 after root No boot KERNEL IS NOT SEANDROID ENFORCING Custom binary blocked by

Hi
i was using Note 5 N920C with 5.1.1 Smoothly.i just rooted phone with SpaceX-Kernel-v0.1 Successfully after i put my google and samsung account after Restart phone i am getting this MSG KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock. then power off.
i still able to enter in DLM and Recovery Mode i wiped my data from recovery cashe but still same.
i also tried to install stock Rom but its Failed

plz advise me what should i do now


Thanks

Screen failure after flash update of ROM

I made a nandroid backup and the reflashed my ROM (Jasmine 9.0 and 9.1) and the debloat script on TWRP 2.8.7.0. Wiped cache. Reboot system.

Now the screen doesn't come on. LG logo doesn't appear. Don't know what I'm doing now.

The ROM boots which I can tell by the LED cycle and it optimized apps, made the phone plugged in sound on boot. If I double tap the digitizer, the LED lights up to pretend the screen came on. Seems like the display is dead but the phone is working and booting. Is this even possible by software? I want to get into recovery and flash a KDZ, but Verizon made that difficult and I can't see at all what I'm doing.

Imperium Rom 10.1 Problem after complete install

Downloaded newer version of the Imperium rom and installed it successfully after i setup the google username and password install some softwares then rebooted the phone i am now stuck into the samsung galaxy s4 logo and no more movements at all for several minutes. tried several times still the same tried full wipe again installed version 9.1 now same story allowed me to boot first time then after that i reboot and the stuck to samsung glaxy s4 logo stuck again any idea what is happening?

How to get the adhesive tape to stick good after screen replacement?

I use original adhesive tape to connect the screen and backside. But everytime I fix a phone it does not stick good enough. I use clamps for 12 hours to get good pressure and also use a heatgun to heat it up before I put the clamps on. Still I have many customers complaining about the sceeen or backside coming off. So I end up using glue. Any suggestions on how to get the adhesive tape to stick good?

Htc one m8 useless after wipe data, no recognized from pc for fastbooting

I tried to install an update from HTC ( Lollipop 5.0 ) but It wasnt possible because my phone was rooted. I came with the status 7 error. Then while reading some articles, I found that in order to get rid off that error and to install a new rom or update I must wipe all data from my phone, even the system part for a clean installation so I wiped it.
After that , my phone freezes on htc white logo.

I can access to fastboot with the Power button an volume
It says

*** TAMPERED ***
*** UNLOCKED ***
M8_UL_CA PVT SHIP S-ON
HBOOT-3.16.0.0000
RADIO-1.16.2133156.UA15G
OpenDSP-v38.2.2-00542-m8974.0311
OS-1.57.598.2
eMMC-boot 2048M
Apr 16 2014,03:20:29.0

And then the options

But when I go to recovery, the phone goes to Philz Touch ClockWorkMod screen
The version of Philz Touch is 6.57.8 and ClockWorkMod is v6.0.5.1

And when I tried to restore my phone, it says there's any backup files, so I cant restore to factory

As my phone can not be recognized by my pc because the OS can not run, I think I can not use One_M8_All-In-One_Kit_v2.0.
Is there any chance to get my HTC work again? I just dont care the Lollipop update now. I just want it to work again. I' ve been reading many articles during these 3 days but I dont know how to repair it yet.

Please help me

Pdt: I tried to add Images but the forum doesnt let me.

Boot problems after stock flash

A friend of mine was running CM on her L720 and asked me to re-image it. I'm not sure what version of CM it was but it was definitely a 4.4.2 build. I tried to flash back to stock using Odin and FNG2 img. Odin reported that it passed but the phone won't boot. It displays the Galaxy logo for 5-6 seconds then goes black and nothing else happens. I can boot into download mode and recovery (CWM). I've tried reflashing and factory reset, but no luck. I have not flashed stock recovery back yet...could this be the issue? It seems like a logical next step but since I know little about troubleshooting these issues, I thought I'd better ask before I screw things up further. Any help would be greatly appreciated. TIA!

Solved Boot Loop After Factory Flash Build mdb08i in fastboot on my Nexus 5X

Hi guys,

I was getting boot loop every time I tried to factory flash mdb08i from https://developers.google.com/androi...s/images?hl=en on my Nexus 5X. I flashed this build more than 5 times and let the device run 20+ minutes during boot animation.

I generally used method 2 from Nexus 5 tutorial since that was the tutorial I used on my Nexus 5:

Code:

---

fastboot flash bootloader C:\image-hammerhead-krt16m\bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:\image-hammerhead-krt16m\radio.img
fastboot reboot-bootloader
fastboot flash system C:\image-hammerhead-krt16m\system.img
fastboot flash userdata C:\image-hammerhead-krt16m\userdata.img
(Note: this command will wipe your device (including \sdcard), EVEN if your bootloader is already unlocked.)
fastboot flash boot C:\image-hammerhead-krt16m\boot.img
fastboot flash recovery C:\image-hammerhead-krt16m\recovery.img
fastboot erase cache
fastboot flash cache C:\androidimage\cache.img

---

However, the missing piece that solved my boot loop was to also run this command at the very end

Code:

---

fastboot flash vendor vendor.img

---

I normally have a batch script that runs all the commands for me.

How I found out about flashing vendor.img:
I found this issue only after I factory flashed mdb08i that I accidentally immediately flashed chainfire's modified mdb08i boot image for enabling root. After flashing chainfire's modified mdb08i, my Nexus 5X passed the boot animation but gave "Internal device error". So I looked up the error and found this thread: http://forum.xda-developers.com/nexu...xus-9-t3112827

I also tried other methods as mentioned in this thread but no luck with it on my end but perhaps will help others: http://forum.xda-developers.com/nexu...image-t2527382

Hope this help others who are also stuck on boot loop after flashing mdb08i on their Nexus 5X.

Error using flashtool after Bootloader unlocking!

Hey guys!
I unlocked my xperia neo v yesterday and tried to flash a custom rom. I Stuck in bootloop. So I tried to flash stock ftf. But The flashtool shows Processing of loader.sin finished with errors. and then displays Ending flash. Then it gets struck. I tried installing flashtool drivers. But no response. Someone please help!!!:(

how can i change my boot animation with android 5.1.1 after rooting it ? FOR G800H

I want to change my boot animation to marshmallow

note 4 touchscreen not calibrated after rooting

hi,
I rooted my note 4 n910f and afterwards installed TWRP, well the screen lost calibration. I now need to touch the screen everytime about 1 cm higher with my fingers to use the phone. sPen is totally fine. is there a way to restore the calibration ?

Problem with ringtones after upgrading to lollipop

Hi friends ,
after upgrading to lollipop i faced this problem
there is no option for choosing ringtones for the two SIM cards
only one option which already acts for the first SIM and the other one rings with another ringtone which there is no option to change it.
it kills me , i tried every thing but no result.
i need your help pls.

Extreme battery drain after 5.1.1 update

Hey guys. Can y'all help me figure out what's sulking my battery? The phone is not sleeping at all. Attachment 3517266

Sent from my SAMSUNG-SM-N910A using Tapatalk

Attached Thumbnails