Showing posts with label Hisense. Show all posts
Showing posts with label Hisense. Show all posts

Sunday, 25 October 2015

[sBricked] Hisense Sero 8 Pro - No Command [Help!]



My Hisense Sero 8 Pro recently updated, the update failed and now it shows the broken android with 'No Command', I looked online and everything seems to point towards recovery mode, the thing is though the Sero 8 Pro does not have any volume keys they are software side, it does however have a small pinhole which i assume is a reset button but i tried poking/pressing/holding it with and without the power button being held down, trying those routes, i tried looking for alternate ways to get into recovery mode and found using ADB works also, tried that to no avail as the commands seemed not to affect the device, this was made harder as the device was only detectable by ADB for 5 seconds during boot up, I also tried using ADB Hard Reset but found out that my device is rooted which was strange as all my attempts to try to root the device failed, according to root checkers.

So now I'm asking Online for some help, quick recap;
- Hisense Sero 8
- No Volume Key
- Pinhole Reset button?
- 'No Command' Screen
- Failed Software Update
- Rooted (Apparently)

If anyone wants a challenge i think i just proposed one.



Saturday, 24 October 2015

[Help] HiSense U970 hard bricked



Hello guys, I have a HiSense U970 with the MT6589 chipset which got hard bricked a week ago. The phone is running a stock 4.2.1 JB and rooted. The problem is that whenever I try to flash anything using SP Flash Tool it shows this error:

BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM failed

I am hopeful the phone isn't totally dead since it can be:
- Detected by the computer WITHOUT the battery while holding vol down
- In Device Manager, it would show MTK USB Port (ComX) under Ports when vol down is held.

This is what happens now:
- Charging does not do anything.
- Cannot boot into recovery
- Cannot be detected by MTK Droid Tools (but I think this app needs a powered up phone to be detected by its system)
- Cannot flash anything using SPFT v3.1320.0.174 and v5.1524.00

I have searched the internet for fixes and solutions but, everything that I have found leads to that error.
Here was what I had done before the problem arose.
- Installed Preloader driver
- Used the latest version of SPFT
- Formatted whole flash except bootloader as I cannot flash the cwm rom found here without formatting
- Flashed ONLY the recovery and then downloaded it.
Green circle appears and after that, it cannot boot anymore. Cannot charge. Cannot boot into recovery.

I have tried the following with no luck:
- Used SPFT v5.1524.00 and v3.1320.0.174
- Flashing only the preloader
- Flashing only the recovery
- Format whole flash
- Formatting whole flash except bootloader
- Format all + download (v5)
- Firmware upgrade + upgrade (v3)
- Using the write memory method for writing preloader
- Flashing stock preloader
- Doing a memory test
All of which goes to the error 4032.

I have also tried using different USB ports with the same results.





If it helps, I used the scatter file for MT6589 and not my own scatter file. Using my own scatter file does not do anything before I flashed the recovery rom so, I used the MT6589 scatter file instead. Also, my scatter file was different from the MT6589.
- This was the scatter file I used.
- And this is my log from MTK Droid Tools which hopefully contains the addresses for the scatter file (I accidentally replaced my own [yea i know, stupid me])
I also cannot find the same scatter file that I had created anywhere on the internet.



I am willing to supply you with anything as long as I have access to it (hoping I have the file/information you need:fingers-crossed:).

I am hoping that you know or at least the very least, can guide me out of mine and others misery. Thank you. :fingers-crossed: