[STOCK] H815 20A STOCK ROM [FF][system + boot + modem + bootloader]

Android 6.0 Marshmallow in G4 via Flashfire
This is for the H815 variant only. Files are from software version 20A

Warning! I only tested in 2 devices and all work well, but I am not sure is all the devices which work or not.
And I don't know can we go back 5.1 via Flashtool, so bear in mind.

Note that Knock code has been removed but will return in a future update.

Quote:

Requirements: You need a rooted device which is in Android 5.1 and installed FlashFire Steps: 1. choose the "H81520A_00.zip" in FlashFire 2. choose "wipe cache partition" 3. click the thunder icon and wait.... 4. it will reboot automatically and.... Welcome to Android 6.0 Marshmallow! Download: H81520A_00.zip https://drive.google.com/file/d/0B6V...ew?usp=sharing (can anyone mirror it for me? many thx!)

My First post, sorry for bad English

Huawei Ascend Mate, Boot Looping, I Think...

So a couple of days ago I dropped my phone (Huawei Ascend Mate (MT1-U06)) ... no harm done, I've dropped my phone plenty of times and it was fine but this time it turned off. Originally I though I broke it, I go to turn it on and it just keep restarting, turns out it's 'Boot Looping'.... I think. I've searched online and I was told to hold down all 3 buttons and enter go recovery mode and put SD card in with some software. Not really sure what the software is, but I bought an SD card and an SD card reader and I'm ready to fix the device!

Just to see what would happen, I went into Recovery mode and it said this:

USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.

Any help?

(BTW I'm a new user to this sight, so go easy on me)

[MOD] Quick Boot for cm11 [Working]

NOTE :- This MOD is not developed by me..!

https://youtu.be/WhQEondW3K4

Here's the original thread.
http://forum.xda-developers.com/show....php?t=2766907

I have tested it.. n it works well with my moto e running cm11.

XT1031 Boot Help

So I got a Moto G today. Went through the motorola process of unlocking bootloader. Upgraded bootloader to lollipop bootloader with philz touch recovery. Cleaned to install new ROM. Ive now tried to flash BlissPop and AICP, both go to boot animation, and get stuck there. Ive waited 20+ minutes on both ROMs........any ideas or suggestions as to why I can't get past the boot animation?

Video Recording Failure After Few Minutes After Boot

I searched the forum and couldn't find anyone with anything similar to this...

Using COS12.1 - yog4pas1n0
TWRP Installed
Rooted
Xposed Installed
ColorOS Camera

Those are the biggest recent changes I've made to my OPO . But recently, the camera will fail for video recording only for all apps (Snapchat, Camera, Instagram, Whatsapp etc.)
I've rebooted a numerous times and always the same result, it'll work after boot (repeatedly) but then fail to work a few minutes after.

I've uninstalled all the Xposed Modules thinking one of them could be the issue
Ran a boot manager to run only the essentials, but still the same issue

I can still take photos but it's just the video recording

Any suggestions from anyone?

Disable update profile at boot.

My Sprint S6 is unlocked and using a different carrier.
ROM: Renegate
At boot, the phone keeps wanting to update the profile (I guess from Sprint). And it keeps giving me an ERROR: Internal Error (407)
Is there a way to disable it?

Note 5 after root No boot KERNEL IS NOT SEANDROID ENFORCING Custom binary blocked by

Hi
i was using Note 5 N920C with 5.1.1 Smoothly.i just rooted phone with SpaceX-Kernel-v0.1 Successfully after i put my google and samsung account after Restart phone i am getting this MSG KERNEL IS NOT SEANDROID ENFORCING
Custom binary blocked by FRP Lock. then power off.
i still able to enter in DLM and Recovery Mode i wiped my data from recovery cashe but still same.
i also tried to install stock Rom but its Failed

plz advise me what should i do now


Thanks

Boot Loop SPG611 Need help to root my tablet please

Hello,

I got the Z3tc SPG611 on lollipop firwmare .200
No matter what I tried I keep on getting bootloop

I have followed instructions: developer option, unknown source, install driver for flashtool successfully on win10...
I flashed the old firmware without any exception, and then the D6603 exploit system only.
When I try to restart the tablet it keeps on bootlooping at the blue animation thing.

the only thing i am not confident about is the MTP mode, i can't find the option to turn it off (not in storage like on nexus devices).

any help would be appreciated. thanks

how do you change boot animations on the note 5

Been searching for a way to change my boot animations, I came across an app that creates them but since Samsung doesn't use the file system/media/bootanimation.zip, I am not able to replace the boot animation. I tried using the mod bootanimations4u, but all that did was get rid of the installed boot animation. I know there has to be away because the rom that I am using has a custom boot animation. Any help is greatly appreciated

Please Help phone won't boot

Ok just got replacement S6 edge had D0l1 firmware on it out the box...flashed unikernel in ODIN on it for root....booted just fine and had root...then flashed latest TWRP through ODIN tried to reboot into recovery Now phone won't boot. if I force a restart it does Sammy logo then a white flash real quick to black screen followed by a vibrate then just stays black. Only thing I can do is get it in DL mode.

Now I have tried to DL the D0l1 Firmware from 2 different sources on here at XDA so I can ODIN back to stock but can't get Odin to recongize the zip.....so I extracted the files then it recongized them but just hung forever on checking md5 sum. I am not a noobie when it comes to rooting and flashing and this is the deepest of trouble I have ever been in as far as Bricking a device. I have no clue what to do now???? Any help please!

Honestly, all I need is the D0l1 firmware which I cannot somehow get without it being a corrupt file

Need help with unbricking Samsung Galaxy S6 [G920F] - stuck on boot loop

I'm completely hopeless, and all I can count on are good people from XDA to help me.

I bought a new Samsung Galaxy S6, T-Mobile version [G920F], running Android 5.1.
I used this tutorial:
http://www.droidviews.com/root-samsu...ry-all-models/

I enabled USB Debugging, downloaded latest Samsung USB drivers.

First I successfully installed TWRP 2.8.7.1, and meanwhile copied the SuperSU.zip to my device.
I had successfully entered TWRP, went to Install, and selected teh SuperSU file. It said it was done, so I went ahead and restarted my device.

Immediately, I noticed that the device was stuck on the boot logo (Galaxy S6 + Powered by Android screen).

And for some reason, when I connect the device with USB to mc PC, Windows says it's "damaged or undetected", something of that sort.
Luckily, I can still detect it in ODIN.

I might mention that I can still enter TWRP & Download Mode from the Bootloop.

I'll give any more information I can, just tell me if there is any hope for me.
Thank you so much.

Huawei Ascend Mate, Boot Looping, I Think...

So a couple of days ago I dropped my phone (Huawei Ascend Mate (MT1-U06)) ... no harm done, I've dropped my phone plenty of times and it was fine but this time it turned off. Originally I though I broke it, I go to turn it on and it just keep restarting, turns out it's 'Boot Looping'.... I think. I've searched online and I was told to hold down all 3 buttons and enter go recovery mode and put SD card in with some software. Not really sure what the software is, but I bought an SD card and an SD card reader and I'm ready to fix the device!

Just to see what would happen, I went into Recovery mode and it said this:

USB Update Enter...
HUAWEI SDCARD&USB UPDATE AGENT VERSION 2.0
This phone is secureboot phone.
This phone is LOCK state.

Any help?

(BTW I'm a new user to this sight, so go easy on me)

Help!! Note 4 not booting up. Boot loop on samsung logo

I have a problem with my note 4 and hoping someone can help me. It is currently in a bootloop and won't go past the Samsung logo. Every time it gets to Samsung logo it just go off, vibrate twice and then restarts again over and over. I can't go into recovery mode as well and when I flash twrp or cmw I get 'recovery is not seandroid enforcing set warrenty bit'. Below is what I have tried so far:

Flash 3 different stock firmware, all flashed successfully but still boot loop
Flash bootloader
Flashed stock recovery, cmw and twrp
Flash pit file

I don't know what else to try. ANYBODY ABLE TO HELP? THANKS

Boot problems after stock flash

A friend of mine was running CM on her L720 and asked me to re-image it. I'm not sure what version of CM it was but it was definitely a 4.4.2 build. I tried to flash back to stock using Odin and FNG2 img. Odin reported that it passed but the phone won't boot. It displays the Galaxy logo for 5-6 seconds then goes black and nothing else happens. I can boot into download mode and recovery (CWM). I've tried reflashing and factory reset, but no luck. I have not flashed stock recovery back yet...could this be the issue? It seems like a logical next step but since I know little about troubleshooting these issues, I thought I'd better ask before I screw things up further. Any help would be greatly appreciated. TIA!

Solved Boot Loop After Factory Flash Build mdb08i in fastboot on my Nexus 5X

Hi guys,

I was getting boot loop every time I tried to factory flash mdb08i from https://developers.google.com/androi...s/images?hl=en on my Nexus 5X. I flashed this build more than 5 times and let the device run 20+ minutes during boot animation.

I generally used method 2 from Nexus 5 tutorial since that was the tutorial I used on my Nexus 5:

Code:

---

fastboot flash bootloader C:\image-hammerhead-krt16m\bootloader.img
fastboot reboot-bootloader
fastboot flash radio C:\image-hammerhead-krt16m\radio.img
fastboot reboot-bootloader
fastboot flash system C:\image-hammerhead-krt16m\system.img
fastboot flash userdata C:\image-hammerhead-krt16m\userdata.img
(Note: this command will wipe your device (including \sdcard), EVEN if your bootloader is already unlocked.)
fastboot flash boot C:\image-hammerhead-krt16m\boot.img
fastboot flash recovery C:\image-hammerhead-krt16m\recovery.img
fastboot erase cache
fastboot flash cache C:\androidimage\cache.img

---

However, the missing piece that solved my boot loop was to also run this command at the very end

Code:

---

fastboot flash vendor vendor.img

---

I normally have a batch script that runs all the commands for me.

How I found out about flashing vendor.img:
I found this issue only after I factory flashed mdb08i that I accidentally immediately flashed chainfire's modified mdb08i boot image for enabling root. After flashing chainfire's modified mdb08i, my Nexus 5X passed the boot animation but gave "Internal device error". So I looked up the error and found this thread: http://forum.xda-developers.com/nexu...xus-9-t3112827

I also tried other methods as mentioned in this thread but no luck with it on my end but perhaps will help others: http://forum.xda-developers.com/nexu...image-t2527382

Hope this help others who are also stuck on boot loop after flashing mdb08i on their Nexus 5X.

how can i change my boot animation with android 5.1.1 after rooting it ? FOR G800H

I want to change my boot animation to marshmallow

Xperia SP won't boot to bootloader

Hello all,

I rooted my Xperia SP and had installed the Cyanogenmod 11 (last stable-ish release, milestone or something) successfully.
After being encouraged by a co-worker that the nightly builds are pretty safe too, I installed a 12.1 nightly (can't remember which, though).
After that I couldn't reboot to bootloader any more to back up my phone.
I can select it in the reboot menu, but the phone will just cycle into a normal reboot and start Cyanogen.
Being brave I installed another nightly (current version: 12.1-20151010-NIGHTLY-huashan), hoping that would help.
It didn't, but luckily that version works, too.

Otherwise the phone works well, but I would like to be able to reboot into the bootloader to create a system backup, before I install more nightlies.

Rebooting into recovery works. However, have no backup option there.

To clarify: booting into bootloader is not necessarily what I want, it's the backup option that I'm after.
On the other hand, this not working properly is kind of a red flag, so I want to make sure nothing is going sideways...

Any advice would be much appreciated! :)

Thanks!

Merlin

[Boot Logo][Flashable] Android 6.0 Marshmallow

Hii guys .. here am created boot logo of android marshmallow for Moto G

Instructions:

1.Download the flashable zip file from the link
2.copy that into sdcard/internal storage
3.reboot to recovery
4.flash the zip file
5.Reboot your device

Downloads: http://d-h.st/XB1a

[Boot Logo][Flashable] Android 6.0 Marshmallow

Hii guys .. here am created boot logo of android marshmallow for Moto E

Instructions:

1.Download the flashable zip file from the link
2.copy that into sdcard/internal storage
3.reboot to recovery
4.flash the zip file
5.Reboot your device

Downloads: http://d-h.st/7rgz

[STOCK] H815 20A STOCK Images + KDZ [system + boot + modem + bootloader]

These are for the H815 variant only. Files are from software version 20A (Android 6.0 Marshmallow).
Included below: TWRP-flashable stock rom, boot, modem and bootloader zips. KDZ is also included.

*At the moment this is only stock/unrooted. Please do not ask about root yet. Will need to look into rooting later today. Perhaps someone can get it sorted before me... but it's late and I need some sleep soon. Also, there is NO anti-rollback used in this update... it is safe to downgrade if you want to go back to Lollipop after trying this.

NOTES...
1. Notifications may not work with all apps. To check for possible missed notifications go to Settings, battery/energy saving, battery consumption, ignore optimization.
2.Knock code has been removed but will return in a future update.

Quote:

Requirements: You must have TWRP 2.8.7+ installed to use these files. Thanks to Dees_Troy as always for that. And, of course, you must have your bootloader unlocked for TWRP to work. Please do not ask if "model x" is supported... did you unlock via LG's official unlock tool? Yes? then you can use it. No? then you can't. Downloads: LG-H81520A-Flashable.System.zip 100% stock untouched system. System zip is currently uploading. File size is about 1.5GB and should be finished uploading by 11AM GMT (18 minutes left..) LG-H81520A-Flashable.Modem.zip This is a flashable stock 20A modem. LG-H81520A-Flashable.Boot.zip This is a flashable stock 20A boot.img. Boot.img contains kernel + dtb + ramdisk. LG-H81520A-Flashable.Bootloader.zip (updated link!) This is a flashable stock 20A bootloader. It contains aboot, factory, hyp, laf, pmic, raw_resources, rpm, sbl1, sdi, sec and tz. Also, KDZ + all stock images for 20A are available here. CODEFIRE DIRECTORY #TEAMCODEFIRE

y u quote OP?